Creality Falcon2 22W
| Links:
Powerful 22W diode laser with integrated air assist, full protective enclosure, and high-volume smoke exhaust system.
The Falcon2 22W is a high-power diode laser system utilizing four 6W compressed laser beams to achieve a combined 22W output. This allows for one-pass cutting of thick materials and high-speed engraving. Our unit is equipped with a full safety enclosure and a dedicated exhaust system for indoor laboratory use.
| Category | Specification |
|---|---|
| Laser Power | 22W (Optical Output) |
| Laser Type | Diode (455±5nm) |
| Spot Size | 0.1mm x 0.15mm |
| Work Area | 400mm x 415mm |
| Max Engraving Speed | 25,000 mm/min |
| Cutting Capacity | 15mm Wood / 10mm Black Acrylic (Single Pass) |
| Air Assist | Integrated Automatic Air Assist |
| Enclosure Type | Fire-resistant Protective Cover with Viewing Window |
| Smoke Exhaust | High-speed Exhaust Fan with 4-inch Ducting |
| Safety Features | Flame Detection, Tilt Protection, Emergency Stop |
| Compatible Software | LightBurn, LaserGRBL |
| Input Voltage | 100-240V / 50-60Hz |
Advanced Features & Upgrades
- Integrated Air Assist: Automatically adjusts the airflow during cutting to clear smoke and debris, resulting in cleaner edges and preventing charring on wood and acrylic.
- Safety Enclosure: The machine is housed in a ventilated, fire-resistant enclosure that filters harmful UV light, allowing for safe observation without constant use of safety goggles (though they remain recommended).
- Smoke Exhaust System: A high-volume external blower pulls fumes through a 4-inch duct, ensuring a safe and odor-free working environment even when processing materials like leather or plywood.
- Triple Monitoring System: The machine features real-time monitoring for Airflow, Lens Dirt, and Flame Detection, automatically pausing the job if an anomaly is detected.
Material Capabilities
| Material | Engrave | Cut (Max) | Recommended Setting |
|---|---|---|---|
| Plywood/MDF | Yes | 15mm | 100% Power, 150mm/min |
| Acrylic (Dark) | Yes | 10mm | 100% Power, 200mm/min |
| Stainless Steel | Yes | No | 100% Power, 3000mm/min (Cold marked) |
| Leather | Yes | 5mm | 40% Power, 800mm/min |
| Clear Acrylic | No* | No* | Requires coating or CO2 laser |
Note for Users: Always ensure the exhaust fan is powered ON before starting a job. Clean the laser lens every 5 hours of operation to maintain cutting efficiency.
